Quick answer
What R-value should a Houston attic have?
Climate Zone 2 calls for at least R-38. Many crews target R-49 to R-60 for summer performance. We measure what you have now and blow to the depth that matches your attic and budget.
Upstairs hits 80° while downstairs feels fine? Check the attic first.
Blown-In Attic Insulation in Houston, TX
When the attic floor only has a thin dusting of fiberglass, your AC is cooling the ceiling from below while the attic cooks above it. If you are looking for a dependable home insulation Houston installer, blown-in fiberglass is the straightest fix for most Houston homes. We blow loose-fill virgin fiberglass to R-38 to R-60, often in one day, with a free attic walkthrough from our local Pasadena crew.
- Licensed & Insured
- Same-Week Scheduling
- Free Estimates
Contact us
4.8 / 221 Reviews
409-316-9957
Not sure what you need? That is normal. Tell us what you are seeing. We call back with plain answers, no jargon, no pressure to sign.
- Licensed & Insured
- ·
- National Brand Since 1985 · Locally Owned Since 2023
- ·
- Same-Week Scheduling
- ·
- Free Estimates
- ·
- Res. & Commercial
Quick answer
Why is my Houston attic under-insulated?
Most pre-2000 homes were built with R-19 or less. Heat and foot traffic compress fiberglass over decades. Gulf Coast humidity can make batts settle. Blown-in adds depth without removing drywall.
Thin attics, hot upstairs, and settled fiberglass, what to check
Compressed fiberglass may look full at the hatch but read only a few inches at the eaves.
Ducts lying on thin insulation pick up heat in a superheated attic.
Dry old material can often stay; wet or moldy batts should be removed first.
R-49 to R-60 targets are common for Houston summer comfort goals.
What Is Blown-In Attic Insulation, and Will It Fix a Hot Upstairs?
Blown-in insulation is loose-fill fiberglass, blown through a hose across your attic floor (or rafter bay in some designs). It fills around trusses and duct chases better than batts laid by hand.
How Do You Know Your Houston Attic Needs More Insulation?
You need blown-in when you can see joists through the insulation, when upstairs bedrooms never cool down, or when your last contractor said the attic is under code. Also common after roof work that disturbed existing material.
Will Blown-In Help With High Electric Bills and Rooms That Never Cool?
Attic surface temperature drops. Upstairs often feels closer to downstairs within the first hot week. Electric bills may ease the following summer, how much depends on air leaks we find during the visit.
Example Blown-In Attic Project · Pearland, TX
Representative example · not a guaranteed outcome
- The problem
- A homeowner in Pearland reported upstairs bedrooms running four to five degrees warmer than downstairs by mid-afternoon. From the attic hatch, six inches of fiberglass looked adequate, but the material was walked down over the west-facing rooms.
- What we found on inspection
- Depth was uneven: thick along the hatch path, thin or missing over the rooms that stayed warm. Several recessed cans had gaps at the ceiling plane. Effective R-value over the hot bedrooms was well below R-30.
- The solution
- Sealed can lights and the attic hatch, then blew fiberglass to R-49 in the thin bays. Install finished in one day with standard cleanup.
- What changed
- Upstairs was usable the same week. The owner said the AC cycled off sooner at night and the next summer bill eased compared to the prior year. Results vary by home; this scope covered sealing plus blow-in only.
See also our attic R-value guide for Houston →
Related on this site
Services: Air Sealing, Attic Fan & Ventilation, Spray Foam Insulation
Guides: 7 Signs Your Home Needs New Insulation
Areas we serve: Pasadena, Baytown, Deer Park, Alvin · all locations
Why Do Houston Attics Overheat Bedrooms Below?
Attic heat radiates down through drywall all afternoon, radiant load on top of thin R-value. Humidity makes insulation compress and lose performance over decades. Ducts in unconditioned attics pick up heat before air hits bedrooms. Most pre-2000 Houston attics are under R-30. Blown-in is the fastest way to add depth without a full foam budget when the ceiling plane is reasonably tight.
0%
Attic
0%
Walls
0%
Windows
0%
Doors & Other
Why upstairs stays hot when the attic has only a few inches of insulation
Blown-in adds depth on the attic floor, the thermal layer over your ceiling. It works best when airflow through the ceiling is controlled first. We check soffit ventilation, duct boots, and whether radiant heat from the roof deck is the main driver of upstairs discomfort.
What R-Value Does a Houston Attic Need. R-38, R-49, or R-60?
- Code baseline: R-38 minimum for attics in our climate zone
- Strong summer performance: R-49 to R-60 depth on the attic floor
- Moisture and ventilation checked first: we confirm the attic is dry and properly vented before adding depth
- Pair with sealing: Air sealing before blowing stops humid air from filtering through new material
How Does Blown-In Attic Insulation Help in Houston Heat?
$0.0k+
Is blown-in cheaper than spray foam?
Typically less than full spray foam for attic-only work.
R-0
How deep should a Houston attic be?
Add inches until we hit the target you approve.
0 day
Can most attics finish in one day?
Most attics done and vacuumed same visit.
Fan-ready
Do you still need an attic fan after blow-in?
Pairs with attic fans when heat load is still high after blowing.
$0.0k+
Is blown-in cheaper than spray foam?
R-0
How deep should a Houston attic be?
0 day
Can most attics finish in one day?
Fan-ready
Do you still need an attic fan after blow-in?
When Is Blown-In the Right Fix for Houston Homes?
Single-family homes where the attic is accessible and ventilation is serviceable. We measure depth, flag wet or crushed material, and tell you if removal is needed before we blow.
Get Residential QuoteBlown-In for Light Commercial Attics and Multi-Family
Light commercial over-deck insulation and multi-family attic upgrades. Phased scheduling for occupied buildings.
Commercial Services →Not sure how many inches you have up there?
We measure for free and show you the depth on camera if you want to see it.
Ready to Cut Your Energy Bills?
Free inspection. No obligation.
Or call: 409-316-9957
What Happens on Blown-In Attic Install Day?
-
What do we measure in your attic first?
Depth check, moisture, ventilation, and leak points.
-
Should we seal before blowing in?
Search & Seal on hatches, cans, and top plates when quoted.
-
How do we blow to the right depth?
Even coverage with marked ruler depths.
-
Are your soffit vents still open?
Soffit paths clear so air can still move.
How Much Does Blown-In Attic Insulation Cost in Houston?
Blown-in attic jobs in Houston commonly run $1,200 to $2,000 for typical attic square footage and target R-value. Larger or removal-first jobs cost more. Quote on site.
Where We Blow In Attic Insulation Around Greater Houston
Insulation services across 23 Greater Houston communities
Google Rating
•
4.8 ★★★★★
(221 reviews)
What Houston Homeowners Say About Blown-In Attic Insulation
Verified Google reviews from homeowners who refreshed their attic depth and comfort.
Tracy Delaney
Verified Review
•August 2026
★★★★★
Google Maps ↗
"I cannot recommend this team highly enough! They handled a complete overhaul of our attic—extracting all of the old insulation, thoroughly sealing and sanitizing the space, and blowing in fresh, high-quality insulation. Their craftsmanship and work ethic from day one were top-notch. What truly sets them apart, however, is their integrity and ongoing customer care. A month after the initial job, they proactively came back out to add insulation to a tricky, obstructed spot that was missed during the initial installation. That level of reliability, accountability, and attention to detail is nearly impossible to find these days. They are hands-down the most professional and dependable insulation crew around. I’ve already been recommending them directly to my own clients, and I will continue to do so without hesitation!"
Owner Response · USA Insulation Houston
"Tracy Delaney, thank you for the great review! At USA Insulation Houston, we’re committed to providing quality insulation services, and we’re glad that showed."
Attic Insulation Questions Houston Homeowners Ask Us
How much does blown-in attic insulation cost in Houston?
Many homes fall between $1,200 and $2,000. Size and target R-value move the number. Free attic walkthrough. Call 409-316-9957.
What R-value does blown-in attic insulation need to reach in Houston?
At least R-38 for our climate zone; we often recommend R-49 to R-60 for summer comfort. We measure your current depth at inspection.
How long does blown-in attic insulation installation take?
Most residential attics finish in one day, including cleanup.
Do you install fiberglass or cellulose blown-in insulation?
We install loose-fill fiberglass, not cellulose. If your attic already has old cellulose from a previous installer, we can remove it before blowing new fiberglass to your target R-value.
Who installs blown-in attic insulation in Houston?
USA Insulation of SE Houston installs it, with a free attic walkthrough before any quote. We're a licensed, insured crew based in Pasadena covering Greater Houston. Call 409-316-9957 to schedule.
Do you install TAP (Thermal Acoustical Pest Control) insulation?
No. TAP is cellulose treated with a borate pesticide, and installation is legally restricted to licensed pest-control companies, not general insulation contractors. If pests or moisture are part of what's driving your attic concerns, our free walkthrough checks for both. We'll recommend fiberglass insulation plus air sealing, or point you to a licensed pest-control provider if TAP's borate treatment is specifically what you need.
Is blown-in fiberglass the best attic insulation for Houston's climate?
For most Houston attics, yes: blown-in fiberglass reaches R-38 to R-60 at a lower cost per square foot than spray foam and fills irregular joist bays completely. Homes with leaky ceilings or complex rooflines often do better pairing it with air sealing, or choosing closed-cell spray foam instead. We recommend based on what we see at your free walkthrough, not a one-size answer.
Independently owned USA Insulation franchise · National brand since 1985 · Locally owned since 2023 · Local Pasadena crew · usainsulation.net/houston